Ballistocardiogram (BCG) and electrocardiogram (ECG) can realize the detection of cardiac function from mechanical and electrical dimensions respectively. By extracting the corresponding characteristic parameters of the two signals and carrying out joint analysis, an important cardiac physiological index such as cardiac contractility, can be reflected. To overcome the shortcomings of complication and heaviness of the existing acquisition equipment, a wearable BCG-ECG signal acquisition system is designed in this paper, which realizes BCG signal acquisition based on accelerometer and ECG signal acquisition based on conductive rubber electrodes. The signals of 6 healthy persons were collected, and BCG signals collected by piezoelectric films were used as reference signals. The waveform characteristics of signals were compared, and the difference of cardiac cycle acquisition was analyzed. The waveform characteristics of the two signals acquired by the device were consistent with the standard signals, and there was no significant difference in the acquisition of the cardiac cycle between the proposed method and the traditional method. The results show that the system can accurately collect human BCG signals and ECG signals. The system provides a basis for subsequent research on BCG signal formation mechanism and health applications.
Citation： XIAO Lei, LI Hongli, ZHANG Xianwen, TANG Jintian, LI Yuejun. A wearable ballistocardiogram-electrocardiogram union acquisition system. Journal of Biomedical Engineering, 2018, 35(5): 727-732. doi: 10.7507/1001-5515.201705039 Copy
Copyright © the editorial department of Journal of Biomedical Engineering of West China Medical Publisher. All rights reserved