ObjectiveTo explore the feasibility of three-dimensional (3D) bioprinted adipose-derived stem cells (ADSCs) combined with gelatin methacryloyl (GelMA) to construct tissue engineered cartilage.MethodsAdipose tissue voluntarily donated by liposuction patients was collected to isolate and culture human ADSCs (hADSCs). The third generation cells were mixed with GelMA hydrogel and photoinitiator to make biological ink. The hADSCs-GelMA composite scaffold was prepared by 3D bioprinting technology, and it was observed in general, and observed by scanning electron microscope after cultured for 1 day and chondrogenic induction culture for 14 days. After cultured for 1, 4, and 7 days, the composite scaffolds were taken for live/dead cell staining to observe cell survival rate; and cell counting kit 8 (CCK-8) method was used to detect cell proliferation. The composite scaffold samples cultured in cartilage induction for 14 days were taken as the experimental group, and the composite scaffolds cultured in complete medium for 14 days were used as the control group. Real-time fluorescent quantitative PCR (qRT-PCR) was performed to detect cartilage formation. The relative expression levels of the mRNA of cartilage matrix gene [(aggrecan, ACAN)], chondrogenic regulatory factor (SOX9), cartilage-specific gene [collagen type Ⅱ A1 (COLⅡA1)], and cartilage hypertrophy marker gene [collagen type ⅩA1 (COLⅩA1)] were detected. The 3D bioprinted hADSCs-GelMA composite scaffold (experimental group) and the blank GelMA hydrogel scaffold without cells (control group) cultured for 14 days of chondrogenesis were implanted into the subcutaneous pockets of the back of nude mice respectively, and the materials were taken after 4 weeks, and gross observation, Safranin O staining, Alcian blue staining, and collagen type Ⅱ immunohistochemical staining were performed to observe the cartilage formation in the composite scaffold.ResultsMacroscope and scanning electron microscope observations showed that the hADSCs-GelMA composite scaffolds had a stable and regular structure. The cell viability could be maintained at 80%-90% at 1, 4, and 7 days after printing, and the differences between different time points were significant (P<0.05). The results of CCK-8 experiment showed that the cells in the scaffold showed continuous proliferation after printing. After 14 days of chondrogenic induction and culture on the composite scaffold, the expressions of ACAN, SOX9, and COLⅡA1 were significantly up-regulated (P<0.05), the expression of COLⅩA1 was significantly down-regulated (P<0.05). The scaffold was taken out at 4 weeks after implantation. The structure of the scaffold was complete and clear. Histological and immunohistochemical results showed that cartilage matrix and collagen type Ⅱ were deposited, and there was cartilage lacuna formation, which confirmed the formation of cartilage tissue.ConclusionThe 3D bioprinted hADSCs-GelMA composite scaffold has a stable 3D structure and high cell viability, and can be induced differentiation into cartilage tissue, which can be used to construct tissue engineered cartilage in vivo and in vitro.
Objective To investigate the effect of homograft of marrow mesenchymal stem cells (MSCs) seeded onto poly-L-lactic acid (PLLA)/gelatin on repair of articular cartilage defects. Methods The MSCs derived from36 Qingzilan rabbits, aging 4 to 6 months and weighed 2.5-3.5 kg were cultured in vitroand seeded onto PLLA/gelatin. The MSCs/ PLLA/gelatin composite was cultured and transplanted into full thickness defects on intercondylar fossa. Thirty-six healthy Qingzilan rabbits were made models of cartilage defects in the intercondylar fossa. These rabbits were divided into 3 groups according to the repair materials with 12 in each group: group A, MSCs and PLLA/gelatin complex(MSCs/ PLLA/gelatin); group B, only PLLA/gelatin; and group C, nothing. At 4,8 and 12 weeks after operation, the gross, histological and immunohistochemical observations were made, and grading scales were evaluated. Results At 12 weeks after transplantation, defect was repaired and the structures of the cartilage surface and normal cartilage was in integrity. The defects in group A were repaired by the hylinelike tissue and defects in groups B and C were repaired by the fibrous tissues. Immunohistochemical staining showed that cells in the zones of repaired tissues were larger in size, arranged columnedly, riched in collagen Ⅱ matrix and integrated satisfactorily with native adjacent cartilages and subchondral bones in group A at 12 weeks postoperatively. In gross score, group A(2.75±0.89) was significantly better than group B (4.88±1.25) and group C (7.38±1.18) 12 weeks afteroperation, showing significant differences (P＜0.05); in histological score, group A (3.88±1.36) was better than group B (8.38±1.06) and group C (13.13±1.96), and group B was better than group C, showing significant differences (P＜0.05). Conclusion Transplantation of mesenchymal stem cells seeded onto PLLA/gelatin is a promising way for the treatment of cartilage defects.
OBJECTIVE To investigate possibility of cartilage cultured in centrifuge tube as graft materials. METHODS: Articular chondrocytes isolated from a 3-week-old rabbit formed cartilage after cultivation for 2 weeks. Articular cartilage of humeral head, growth plate of proximal tibia and meniscus were collected from a 6-week-old rabbit. The ultrastructure of chondrocytes and extracellular matrix in the three kinds of cartilages and cultured cartilage were observed by transmission electronic microscopy. RESULTS: Cartilage cultured in centrifuge tube possessed unique ultrastructure and was similar to articular cartilage and growth plate, but it was markedly different from meniscus. The four kinds of cartilages were characteristic of respectively different chondrocytes and extracellular matrix. Cultured cartilage showed typical apoptosis of chondrocytes and "dark chondrocytes" appeared in growth plate. Condrocyte apoptosis was not seen in articular cartilage and meniscus. CONCLUSION: Cartilage cultured in centrifuge tube has unique ultrastructure and may be used as graft materials for articular cartilage and growth plate.
Objective To study the feasibility of using mice marrow stromal stem cells(MSCs) as seed cells for tissue engineering cartilage to embed the seed cells in acellular cartilage matrix of human auricle. Methods Acellular cartilage matrix was made from human auricle cartilage. The MSCs were isolated from the nucleated cells fraction of mice marrow by centrifuge.The MSCs were embedded in acellular cartilage matrix. After 10 day’s combined culture, the specimens were observed with optical and electrical microscope.Results The MSCs could well proliferate in the acellular cartilage matrix. The cells were not well-distributed in acellular cartilage matrix. There were more cells in the peripheral part of the matrix than in the central part of the matrix. Most of the cells were in cartilaginous lacunae. There were 1 or 2 cells in every cartilaginous lacunae.Conclusion The MSCs can be used as seed cells of tissue engineering and can well proliferate in the acellular cartilage matrix and become tissue engineering cartilage.
【Abstract】 Objective The seed cells source is a research focus in tissue engineered cartilage. To observe whether the post-RNA interference (RNAi) chondrocytes could be used as the seed cells of tissue engineered cartilage. Methods Chondrocytes were separated from Sprague Dawley rats. The first passage chondrocytes were used and divided into 2 groups: normal chondrocytes (control group) and post-RNAi (experimental group). Normal and post-RNAi chondrocytes were seeded into chitosan/gelatin material and cultured in vitro to prepare tissue engineered cartilage. The contents of Aggrecan and Aggrecanase-1, 2 were measured by HE and Masson staining, scanning electron microscope (SEM), and RT-PCR. Results The histological results: no obvious difference was observed in cell number and extracellular matrix (ECM) between 2 groups at 2 weeks; when compared with control group, the secretion of ECM and the cell number increased in experimental group with time. The RT-PCR results: the expression of Aggrecan mRNA in experimental group was significantly higher than that in control group (P lt; 0.05); but the expressions of Aggrecanase-1, 2 mRNA in experimental group were significantly lower than those in control group (P lt; 0.05). The SEM results: the cell number in experimental group was obviously more than that in control group, and the cells in experimental group were conjugated closely. Conclusion The post-RNAi chondrocytes can be used as the seed cells for tissue engineered cartilage, which can secrete more Aggrecan than normal chondrocytes. But their biological activities need studying further.
Objective To explore the possibility of constructing tissue engineered cartilage complex three-dimensional nano-scaffold with collagen type II and hyaluronic acid (HA) by electrospinning. Methods The three-dimensional porous nano-scaffolds were prepared by electrospinning techniques with collagen type II and HA (8 ∶ 1, W ∶ W), which was dissolved in mixed solvent of 3-trifluoroethanol and water (1 ∶ 1, V ∶ V). The morphology were observed by light microscope and scanning electron microscope (SEM). And the porosity, water absorption rate, contact angle, and degradation rate were detected. Chondrocytes were harvested from 1-week-old Japanese white rabbit, which was disgested by 0.25% trypsin 30 minutes and 1% collagenase overlight. The passage 2 chondrocytes were seeded on the nano-scaffold. The cell adhesion and proliferation were evaluated by cell counting kit 8 (CCK-8). The cell-scaffold composites were cultured for 2 weeks in vitro, and the biological morphology and extracelluar matrix (ECM) secretion were observed by histological analysis. Results The optimal electrospinning condition of nano-scaffold was 10% electrospinning solution concentration, 10 cm receiver distance, 5 mL/ h spinning injection speed. The scaffold had uniform diameter and good porosity through the light microscope and SEM. The diameter was 300-600 nm, and the porosity was 89.5% ± 25.0%. The contact angle was (35.6 ± 3.4)°, and the water absorption was 1 120% ± 34% at 24 hours, which indicated excellent hydrophilicity. The degradation rate was 42.24% ± 1.51% at 48 days. CCK-8 results showed that the adhesive rate of cells with scaffold was 169.14% ± 11.26% at 12 hours, and the cell survival rate was 126.03% ± 4.54% at 7 days. The histological and immunohistochemical staining results showed that the chondrocytes could grow well on the scaffold and secreted ECM. And the similar cartilage lacuma structure could be found at 2 weeks after co-culture, which suggested that hyaline cartilage formed. Conclusion The collage type II and HA complex three-dimensional nano-scaffold has good physicochemical properties and excellent biocompatibility, so it can be used as a tissue engineered cartilage scaffold.
Objective To study the influence of different mechanical environments on repair cartilage defect with marrow mesenchymal stem cells as seed cells. Methods The rabbit marrow mesenchymal stem cells were isolated and cultured. The cartilage defects were repaired by autologous tissue engineered cartilage with the marrow mesenchymal stem cells as seed cells. Fifteen rabbits with cartilage defect were divided into 3 groups: dislocation group with cell-free scaffold(controlgroup), dislocation group with cartilaginous construct and normal mechanical environment group with cartilaginous construct. The repaired tissue was harvested and examined 6 weeks postoperatively. Results The repair tissue in normal mechanical environment group with cartilaginous construct showed cartilage-like tissue in superficial layer and subchondral bone tissue in deep layer 6 weeks postoperatively. The defect was filled with bone tissue in dislocation group with cartilaginous construct 6 weeks postoperatively. The surrounding normal cartilage tissue showed vascular invasion from subchondral area and the concomitant thinningof the normal cartilage layer. The cartilaginous construct left in the femoral trochlea groove formed hyaline cartilage-like tissue. The defect was repaired byfibrous tissue in control group. Conclusion The repaired tissue by tissue engineered cartilage with marrow mesenchymal stem cells as seed cells showed the best result in normal mechanical environment group, which indicates that it will be essential for the formation and maintenance of tissue engineered cartilage to keep the normal mechanical stress stimulus.
Objective To sum up the research advances of the seed cell and the culture system using in tissue engineering cartilage. Methods The recent original articles about the seed cell and the culture system in tissue engineering cartilage were extensively reviewed. Results At present, autologous or homologous cells is still major seed cell and the three dimensional culture system is also major system for tissue engineering cartilage. Conclusion The source of seed cell for tissue engineering cartilage. Conclusion The source of seed cell for tissue engineering cartilage should be further explored, and the culture system need to be improved and developed.
Objective To explore an experimental method of transfecting the marrow stromal stem cells (MSCs) with the reconstructed PGL3-t ransforming growth factor-β1 (TGF-β1) gene and to evaluate the feasibility of selfinduction of MSCs to the chondrocytes in vitro so as to provide a scientific and experimental basis for a further “gene enhanced tissue engineering” research. Methods The rabbit MSCs was transfected with the reconstructed PGL3-TGF-β1gene by the Liposo mesMethod, the growth of the cells were observed, and the growth curve was drawn. The living activity of the transfected cells in the experimental group was evalua ted by MTT, and the result was significantly different when compared with that in the control group. By the immunohistochemistry method (SABC), the antigens of TGF-β1 and collagen Ⅱ were examined at 2 and 7 days of the cell culture afte r transfe ction with PGL3-TGF-β1gene. The pictures of the immunohistochemistry slice were analyzed with the analysis instrument, and the statistical analysis was perfor med with the software of the SPSS 11.0, compared with the control group and the blank group. Results Transfection of the cultured rabbit MSCs in vitro with the reconstructed PGL3-TGF-β1gene by the Liposomes Method achie ved a success, with a detection of the Luceraferase activity. The result was significantly different from that in the control group (Plt;0.01). Tested by MTT, the living acti vity of the transfected cells was proved to be significantly decreased (Plt;0.01 vs. the control group). By the immunohistochemistry method (SABC) to study TGF-β1 positive particles were detected in the experimental group，but there were no positive particles in the control and the blank groups. There was a significant difference between the two groups of the experiment and the control group based on the analysis of the ttest (Plt;0.01). By the immunohistochemistry me thod (SABC) to study collagen Ⅱ, there were more positive particles in the transfected cells in t he experimental group than in the control and the blank groups, and there was a significant difference between the experimental group and the two other groups based on the t-test (Plt;0.01). Conclusion Transfection of the rabbit MSCs with the reconstructed PGL3-TGF-β1 gene by the Liposomes Method is successful. There may be some damage to the cells when transfection is performed. The transfecte d BMS cells with PGL3-TGF-β1 gene can express and excrete TGF-β1when cultured in vitro. The transfected MSCs that secret TGF-β1 can be self-induced into the chondrocytes after being infected for 7 days when cultured in vitro.