Objective To discuss the short-term effectiveness of total hip arthroplasty (THA) for post-traumatic osteoarthritis secondary to acetabular fracture. Methods Between January 2004 and March 2012, the clinical data was analyzed retrospectively from 12 cases (13 hips) of post-traumatic osteoarthritis secondary to acetabular fracture undergoing THA. Of 12 patients, 6 were male and 6 were female, with an average age of 55.6 years (range, 40-68 years). The locations were the left hip in 5 cases, the right hip in 6 cases, and bilateral hips in 1 case. The interval between acetabular fracture and THA was 65.7 months on average (range, 12-240 months). The preoperative hip Harris score was 48.8 ± 9.5. Results The incisions healed by first intention. No deep vein thrombosis and infection occurred postoperatively. Ten cases were followed up 1-7 years (mean, 4.8 years). The hip Harris score was 86.5 ± 8.6 at last follow-up, showing significant difference when compared with preoperative score (t=10.520, P=0.006). X-ray films showed no acetabular prosthesis instability. Stem subsidence (2 mm) occurred in 1 case, peri-prosthetic osteolysis in 2 cases, and heterotopic ossification in 2 cases (Brooker type I and type II in 1 case, respectively). Conclusion THA has satisfactory short-term effectiveness for post-traumatic osteoarthritis secondary to acetabular fracture. The good effectiveness is based on strict case selection, pathological evaluation, and the proper acetabular reconstruction.
ObjectiveTo explore the effectiveness of a new H-shaped anatomical titanium plate in treatment of posterior wall/posterior column acetabular fractures.MethodsBetween March 2012 and April 2019, 46 patients with acetabular fractures involving posterior wall/posterior column were treated with the new H-shaped anatomical titanium plates. There were 28 males and 18 females. The age ranged from 20 to 70 years, with an average of 45.5 years. Among the patients, 34 cases were injured by traffic accidents and 12 cases by falling from height. The time from injury to operation ranged from 2 to 14 days, with an average of 7 days. According to Letournel-Judet classification, there were 12 cases of posterior wall fractures, 1 case of posterior column fracture, 3 cases of transverse fractures, 9 cases of transverse fractures involving posterior walls, 8 cases of posterior column and posterior wall fractures, 2 cases of anterior column and posterior semi-transverse fractures, 3 cases of T-shaped fractures, and 8 cases of double column fractures. Matta reduction standard was used to evaluate fracture reduction and Merle d’Aubign-Postel score was used to evaluate hip joint function.ResultsAll operations were successfully completed. The time of posterior operation was 60-120 minutes, with an average of 80 minutes. The amount of intraoperative blood loss ranged from 200 to 600 mL, with an average of 300 mL. All the incisions healed by first intention and no infection, deep vein thrombosis, or sciatic nerve injury occurred. All 46 patients were followed up 6-72 months, with an average of 37 months. According to Matta reduction standard, 40 cases obtained anatomic reduction, 4 cases satisfactory reduction, 2 cases unsatisfactory reduction, and the satisfaction rate was 95.7% (44/46). All fractures healed, and the healing time was 3-6 months, with an average of 4.3 months. No internal fixation failure occurred during the follow-up. At last follow-up, the Merle d’Aubign-Postel score ranged from 6 to 18 (mean, 15.5), including 38 cases of excellent, 4 cases of good, 2 cases of fair, and 2 cases of poor, with an excellent and good rate of 91.3% (42/46). Heterotopic ossification occurred in 4 cases, traumatic arthritis in 4 cases, and osteonecrosis of femoral head in 2 cases after operation.ConclusionFor acetabular fractures involving posterior wall/posterior column, the new H-shaped anatomical titanium plate can provide stable fixation, satisfactory reduction, and good recovery of hip function.
This study aims to analyze the biomechanical stability of Magic screw in the treatment of acetabular posterior column fractures by finite element analysis. A three-dimensional finite element model of the pelvis was established based on the computed tomography (CT) and magnetic resonance imaging (MRI) data of a volunteer and its effectiveness was verified. Then, the posterior column fracture model of the acetabulum was generated. The biomechanical stability of the four internal fixation models was compared. The 500 N force was applied to the upper surface of the sacrum to simulate human gravity. The maximum implant stresses of retrograde screw fixation, single-plate fixation, double-plate fixation and Magic screw fixation model in standing and sitting position were as follows: 114.10, 113.40 MPa; 58.93, 55.72 MPa; 58.76, 47.47 MPa; and 24.36, 27.50 MPa, respectively. The maximum stresses at the fracture end were as follows: 72.71, 70.51 MPa; 48.18, 22.80 MPa; 52.38, 27.14 MPa; and 34.05, 30.78 MPa, respectively. The fracture end displacement of the retrograde tension screw fixation model was the largest in both states, and the Magic screw had the smallest displacement variation in the standing state, but it was significantly higher than the two plate fixations in the sitting state. Magic screw can satisfy the biomechanical stability of posterior column fracture. Compared with traditional fixations, Magic screw has the advantages of more uniform stress distribution and less stress, and should be recommended.
Objective To evaluate the results of operative treatment of complex acetabular fractures and to investigate its influence factors. Methods From June 2000 to August 2006, 54 patients with complex acetabular fractures were treated, including 44 males and 10 females aged 20-75 years old (average 39.1 years old). Fractures were due to traffic accidentin 40 cases, fall ing from high places in 8 cases and crush by heavy objects in 6 cases. All cases were fresh and close fractures and the time from injury to operation was 5-72 days. There were 5 cases of posterior column and posterior wall fracture, 25 of transverse and posterior wall fracture, 2 of T-type fracture, and 22 of double column fracture. During operation, Kocker- Lagenbach approach was used in 23 cases, anterior il ioinguinal approach was appl ied for 3 cases and the combination of anterior and posterior approaches was performed on 28 cases. AO reconstructive plate and screw internal fixation were used in all the cases. Results Fifty-two cases were followed up for 12-74 months (average 31.3 months). Anatomical reduction was achieved in 23 cases, satisfactory reduction in 19 cases, poor reduction in 10 cases, and the excellent and good rate reached 80.77%. During operation, 1 case suffered from a tear in the external il iac vein and healed after vein repair; 2 cases had sciatic nerve injury and took mecobalamin as oral administration, one of them fully recovered, and the other had incomplete recovery at 18-month follow-up. At the final follow-up, there were 6 cases of severe heterotopic ossification, one of them received heterotopic bone resection and the rest 5 patients received conservative treatment; there were 9 cases of traumatic osteoarthritis, one of them received total hip replacement and the rest 8 patients received conservative treatment; there were 5 cases of avascular necrosis of the femoral head, two of them received total hip replacement, 1 received no further treatment because the femoral head didn’ t collapse, and the rest 2 patients gave up total hip replacement; 75.00% patients were graded as excellent and good according to the modified Merled’Aubigné-Postel hip score system. Patients’ qual ity of l ife was compared with local population normsmatched for age and sex by using SF-36 scales, their overall score were below the local population norms, and their general health, vital ity, role l imitation due to emotional problems and mental health were comparable to the local population norms. Logistic regression analysis revealed the time to reduce hip dislocation, qual ity of fracture reduction nd traumatic arthritis were independent risk factors affecting postoperative functional outcomes. Conclusion Applying open reduction and internal fixation in the treatment of displaced complex acetabular fractures has a satisfying therapeutic effect. Time to reduce hip dislocation, qual ity of fracture reduction as well as traumatic arthritis are independent risk factors affecting postoperative functional outcomes.
Objective To investigate the causes and managements of acetabular fracture during primary total hip arthroplasty (THA). Methods Between May 2005 and July 2008, 9 patients (9 hi ps) suffered from acetabular fractures during primary THA. There were 1 male and 8 females with an average age of 63.3 years (range, 41-73 years), including 4 cases of developmental dysplasia of the hip, 2 cases of rheumatoid arthritis, 1 case of old femoral neck fracture, 1 case of avascular necrosis of femoral head, and 1 case of ankylosing spondyl itis. Three left hips and 6 right hips were involved. The preoperative Harris score was 40.4 ± 2.9. All the patients underwent cementless THA. Among nine acetabular fractures, 8 fractures were stable (2 anterior wall fractures and 6 posterior wall fractures), which were fixed by additional augmentation screws in 7 cases and accepted no special treatment in 1 case; 1 fracture was unstable (posterior wall fracture with posterior column incomplete fracture), which was treated by bone grafting and additional screws. Results The postoperative X-ray films showed that the position of the prosthesis were favorable. All incisions healed by first intention without early compl ication. Nine patients were followed up 1-4 years (mean, 2 years and 7 months). The Harris score was 87.8 ± 3.9 at last follow-up, showing significant difference when compared with the preoperative score (t=44.904, P=0.000). The X-ray films showed fracture heal ing at 8 weeks. No loosening occurred. Conclusion When primary THA is performed, the preoperative X-ray film should be studied and measured carefully, operation should be accurate and violence should be avoided. The diameter of the acetabular component should be equal to the diameter of a drill or not larger than 2 mm. In patients with severe osteoporosis, the diameter of the acetabular components should be the same diameter as a drill and additional screws are used to fix, or cemented cup is used. Once an acetabular fracture occurs during the primary THA, additional screw or bone grafting with additional screws should be chosen according to the fracture type and stabil ity, and good cl inical results can be expected.
Objective To evaluate the results of operative treatment of acetabular fractures and to investigate its influence factors. Methods The cl inical data were analyzed retrospectively from 82 patients with acetabular fractures treated between September 2004 and June 2009. Of 82 patients, 65 were male and 17 were female, aged 26-72 years (mean, 38 years).Fractures were caused by traffic accident in 62 cases, by crush in 13 cases, and by fall ing from height in 7 cases. The time from injury to admission was 30 minutes to 12 days (median, 7.6 hours) in 70 cases, 12 cases were transferred because poor result after 34-67 days of conservative treatment. According to Judet classification, there were 24 cases of posterior wall fracture, 3 cases of posterior column fracture, 1 case of anterior wall fracture, 2 cases of anterior column fracture, 6 cases of transverse fracture, 16 cases of transverse and posterior wall fracture, 4 cases of posterior column and posterior wall fracture, 5 cases of T-type fracture, 3 cases of anterior and posterior hemitransverse fracture, and 18 cases of complete both-column fracture; 24 cases combined with dislocation of the hip. During operation, Kocher-Langenbeck approach was used in 49 cases, anterior il ioinguinal approach in 19 cases, and the combination of anterior and posterior approaches in 14 cases. Reconstructive plate (74 cases) and hollow lag screw (8 cases) internal fixation were used. The function of the hip was evaluated according to the modified Merled’Aubigne- Postel hip score system postoperatively. According to fracture type, age, lower extremity fracture before operation, qual ity of reduction, timing of surgery, hi p dislocation and time of reduction, operative approach, deep vein thrombosis (DVT), and heterotopic ossification (HO), the patients were divided into the groups and the results were compared. Results Accordancewith the Matta X-ray evaluation criteria, anatomic reduction was achieved in 21 cases, good reduction in 37 cases, fair reduction in 16 cases, and poor reduction in 8 cases, and the excellent and good rate was 71%. All the cases were followed up 12-52 months mean, 34 months). Iatrogenic sciatic nerve injury occurred in 8 cases, infection in 3 cases, HO in 16 cases, DVT in 3 cases, hip posttraumatic arthritis in 12 cases, and avascular necrosis of the femoral head in 9 cases. X-ray examination showed that 80 cases achieved fracture union at 10-24 weeks after operation (mean, 14 weeks) and 2 cases had fracture delayed union at 10 months and 12 months after operation. According to the modified Merled’Aubigne-Postel hip score system, the function of the hip was rated as excellent in 26 cases, good in 32, fair in 20, and poor in 4 at 6 months after operation; the excellent and good rate was 71%. The affecting factors of cl inical results of acetabular fractures were fracture type, age, lower extremity fracture before operation, qual ity of reduction, timing of surgery, hip dislocation and time of reduction (P lt; 0.05). However the operative approach, DVT, and HO were not affecting factor of the acetabular fractures (P gt; 0.05). Conclusion Operative treatment of acetabular fractures has a satisfying therapeutic effect. Fracture type, age, lower extremity fracture before operation, qual ity of reduction, timing of surgery, hip dislocation, and time of reduction are risk factors affecting postoperative results.
ObjectiveTo explore the effectiveness of the calcaneal plate bridge reconstruction plate for acetabular fracture involving quadrilateral surface via modified Stoppa approach.MethodsBetween January 2015 and December 2017, 18 patients with acetabular fracture involving quadrilateral surface were treated with the calcaneal plate bridge reconstruction plate via the modified Stoppa approach. There were 12 males and 6 females. The age ranged from 28 to 63 years (mean, 39 years). The cause of injury was traffic accident in 13 cases and falling from height in 5 cases. According to the Letournel-Judet classification, there were 10 cases of anterior and posterior column fractures, 6 cases of T-shaped fractures, and 2 cases of anterior column and posterior semi-transevere fractures. The interval from injury to operation was 6 to 24 days (mean, 8.6 days). The reduction quality was assessed by postoperative X-ray film and CT according to the criteria proposed by Matta. The hip joint function was assessed by the modified Merled’Aubigné-Postel score.ResultsThe operation time was 120-240 minutes (mean, 165 minutes) and the intraoperative blood loss was 600-1 400 mL (mean, 850 mL). All patients were followed up 18-30 months (mean, 24.5 months). There were 2 cases of the fat liquefaction of abdominal incisions, 3 cases of intraoperative injury of lateral femoral cutaneous nerve, 1 case of lower limb thrombosis, and 1 case of abdominal pain and hematuria due to intraoperative accidental bladder injury. According to the criteria proposed by Matta, the reduction quality rated as anatomic reduction in 12 cases, satisfactory reduction in 5 cases, and unsatisfied reduction in 1 case, and the satisfaction rate was 94.4%. All fractures healed with the healing time of 3-5 months (mean, 3.4 months). During follow-up, no internal fixator loosening, breakage, or fracture displacement occurred. At last follow-up, according to modified Merled’Aubigné-Postel score, hip joint functions rated as excellent in 11 cases, good in 4 cases, fair in 2 cases, and poor in 1 case. The excellent and good rate was 83.3%.ConclusionApplication of calcaneal plate bridge reconstruction plate via the modified Stoppa approach for the acetabular fracture involving the quadrilateral surface can obtain satisfactory effectiveness.
Objective To investigate the effectiveness of HoloSight Orthopaedic Trauma Surgery Robot-assisted infra-acetabular screw placement for treatment of acetabular fractures. Methods The clinical data of 23 patients with acetabular fractures treated with open reduction and internal fixation and infra-acetabular screw placement in two medical centers between June 2022 and October 2023 were retrospectively analyzed. According to the the method of infra-acetabular screw placement, the patients were divided into navigation group (10 cases, using HoloSight Orthopaedic Trauma Surgery Robot-assisted screw placement) and freehand group (13 cases, using traditional X-ray fluoroscopy to guide screw placement). There was no significant difference in gender, age, body mass index, cause of injury, time from injury to operation, and Judet-Letournel classification between the two groups (P>0.05). The time of infra-acetabular screw placement, the fluoroscopy frequency, the guide pin adjustment times, the quality of screw placement, the quality of fracture reduction, and the function of hip joint were compared between the two groups. ResultsAll patients completed the operation successfully. The time of screw placement, the fluoroscopy frequency, and guide pin adjustment times in the navigation group were significantly less than those in the freehand group (P<0.05). The quality of screw placement in the navigation group was significantly better than that in the freehand group (P<0.05). Patients in both groups were followed up 6-11 months, with an average of 7.7 months. There were 9 and 9 cases in the navigation group and the freehand group who achieved excellent and good fracture reduction quality at 1 week after operation, and 12 and 12 cases with excellent and good hip joint function at last follow-up, respectively, and there was no significant difference between the two groups (P>0.05). The fractures in both groups healed well, and there was no significant difference in healing time (P>0.05). During the follow-up, there was no complication related to screw placement, such as failure of internal fixation, vascular and nerve injury, incisional hernia. ConclusionIn the treatment of acetabular fractures, compared with the traditional freehand screw placement, the HoloSight Orthopaedic Trauma Surgery Robot-assisted screw placement can reduce the time of screw placement, improve the accuracy of screw placement, and reduce the amount of radiation, which is an efficient, accurate, and safe surgical method.
Objective To evaluate the effect of the modified extended iliofemoral approach on treatingcomplex acetabular fractures. Methods Thirty-six cases of complex acetabular fractures were treated by the open reposition and internal fixation by a modified extended iliofemoral approach. Results Thirty-sixcases were followed up for 7-46 months, with an average of 23.8 months. According to the Matta standard, anatomical reposition was performed in 24 cases, perfect reposition in 8 cases, and unsatisfactory reposition in 4 cases. By the modified d’Aubignepostel score, among the 36 cases, 22 had an excellent result, 9 had a good result, and 5 had a poor result. Conclusion Themodified extended iliofemoral approach facilitates the operative exposure of the anterior and posterior walls and both columns of the acetabulum in the surgically-treated acetabular fractures by the open reposition and internal fixation.Because of the reconstruction, the functions of the abductor muscle mass managed by the lagscrew-fixed osteotomies of the iliac crest, and greater trochanter, the patients can achieve a rapid rehabilitation of the joint.
ObjectiveTo compare the biomechanical difference of 4 kinds of internal fixations for acetabular fracture in quadrilateral area. MethodsThe transverse fracture models were created in 16 hemipelves specimens from 8 adult males, and were randomly divided into 4 groups according to different internal fixation methods (n=4): infrapectineal buttress reconstruction plate (group A), infrapectineal buttress locking reconstruction plate (group B), reconstruction plate combined with trans-plate quadrilateral screws (group C), and anterior reconstruction plate-lag screw (group D). Then the horizontal displacement, longitudinal displacement of fractures, and axial stiffness were measured and counted to compare the stability after continuous vertical loading. ResultsUnder the same loading, the horizontal and longitudinal displacements of groups A, B, C, and D were decreased gradually; when the loading reached 1 800 N, the longitudinal displacement of group A was more than 3.00 mm, indicating the failure criterion, while the axial stiffness increased gradually. Under 200 N loading, there was no significant difference (P>0.05) in horizontal displacement, longitudinal displacement, and axial stiffness among 4 groups. When the loading reached 600-1 800 N, significant differences were found in horizontal displacement, longitudinal displacement, and axial stiffness among 4 groups (P<0.05) except the horizontal displacement between groups C and D (P>0.05). ConclusionFor acetabular fracture in the quadrilateral area, anterior reconstruction plate-lag screw for internal fixation has highest stability, followed by reconstruction plate combined with trans-plate quadrilateral screws, and they are better than infrapectineal buttress reconstruction plate and infrapectineal buttress locking reconstruction plate.