OBJECTIVE: From the point of view of material science, the methods of tissue repair and defect reconstruct were discussed, including mesenchymal stem cells (MSCs), growth factors, gene therapy and tissue engineered tissue. METHODS: The advances in tissue engineering technologies were introduced based on the recent literature. RESULTS: Tissue engineering should solve the design and preparation of molecular scaffold, tissue vascularization and dynamic culture of cell on the scaffolds in vitro. CONCLUSION: Biomaterials play an important role in the tissue engineering. They can be used as the matrices of MSCs, the delivery carrier of growth factor, the culture scaffold of cell in bioreactors and delivery carrier of gene encoding growth factors.
ObjectiveTo review the research progress of medicine biomaterials in prevention and treatment of adhesion after tendon injury, and to provide reference for clinical treatment.MethodsThe literature on the application of medical biomaterials in the prevention and treatment of tendon adhesions in recent years was reviewed, and the biological process, treatment methods, and current status of tendon adhesions were summarized.ResultsTendon adhesion as part of the healing process of the tendon is the biological response of the tendon to the injury and is also a common complication of joint dysfunction. Application of medical biomaterials can achieve better biological function of postoperative tendon by reducing the adhesion of peritendon tissues as far as possible without adversely affecting the tendon healing process.ConclusionThe use of medical biomaterials is conducive to reduce the adhesion of tendon after operation, and the appropriate anti-adhesion material should be selected according to the patients’ condition and surgical needs.
Objective To introduce the development of dextran-based hydrogel and its drug delivery system in drug sustained and/or controlled release, and to investigate their application in tissue engineering.Methods Related literature was extensively reviewed and comprehensively analyzed. Results In recent years, great progress was made in the studies of dextran-based hydrogels and study on dextran-based intelligent materials became an investigative hotspot especially in tissue engineering. Conclusion Dextran based hydrogel is considered to be a good potential material in field of drug delivery and tissue engineering. Endowed with new characteristics, a series of intelligent biomaterials can be derived from dextran-based hydrogels, which can be widely used in biomedicine. Further study should be done on the industrialization of its interrelated production.
Objective To investigate the currently-used biomaterials in reparative and reconstructive surgery and to clarify the relationship between the development of biomaterials and the progress of reparative and reconstructive surgery. Methods Based on the author’s many years’ scientific researches and combined with the literature available at home and abroad, the biomaterials used in the clinical practice, and their kinds and application fields were summarized. Results Based on the sufficient knowledge of the component structure of biomaterials and the patient’s pathological status, the matching biomaterials could be designed and developed. According to the analysis on some common defects occurring in the skin, bone, cartilage, vocalcord, nerve, and drum membrane, the methods of repairing the defects with biomaterials that we had developed, such as collagen, chitosan, and hyaluronate, achieved good results. Conclusion The rapid development of biomaterials can greatly promote progress of reparative and reconstructive surgery andthere exists a dependence relationship between the two. The related histological responses and the importance of biological estimation after implantation of biomaterials should be emphasized.
Objective To investigate cell cycle as a new tool to evaluate the biocompatibility of biomaterials.Methods The cell cycle and the expression of related genes were analyzed by the methods of immunocytochemistry, protein blotting, RT PCR and flow cytometry. Results The physical properteis, chemical properties and topological properities of biomaterials could not only influence cell cycle of the cells attached onto biomaterials but also affect the expression of related genes of target cells. Conclusion As an important extension of routine proliferation epxeriments, the study of cell cycle control will be great help for us to to study the cell group as an organic society. It revealed the balance between cell proliferation, cell differentiation and apotosis. It is suggested that the study of cell cycle control will play a key role in the research of tissue engineering.
The evaluation of blood compatibility of biomaterials is crucial for ensuring the clinical safety of implantable medical devices. To address the limitations of traditional testing methods in real-time monitoring and electrical property analysis, this study developed a portable electrical impedance tomography (EIT) system. The system uses a 16-electrode design, operates within a frequency range of 1 to 500 kHz, achieves a signal to noise ratio (SNR) of 69.54 dB at 50 kHz, and has a data collection speed of 20 frames per second. Experimental results show that the EIT system developed in this study is highly consistent with a microplate reader (R2=0.97) in detecting the hemolytic behavior of industrial-grade titanium (TA3) and titanium alloy—titanium 6 aluminum 4 vanadium (TC4) in anticoagulated bovine blood. Additionally, with the support of a multimodal image fusion Gauss-Newton one-step iterative algorithm, the system can accurately locate and monitor in real-time the dynamic changes in blood permeation and coagulation caused by TC4 in vivo. In conclusion, the EIT system developed in this study provides a new and effective method for evaluating the blood compatibility of biomaterials.
OBJECTIVE: To review the advance in materials of nerve conduit and Schwann cell transplantation for preparation of artificial nerve with tissue engineering technique. METHODS: Recent literatures about artificial nerve, nerve conduit and Schwann cell transplantation were extensively reviewed. RESULTS: Many biomaterials such as silicon, dacron, expanded polytetrafluoroethylene(ePTFE), polyester and chitin could be used as nerve conduits to repair nerve defect, the degradable biomaterials were better. The nerve conduit with intrinsic filaments could be used to bridge an extended gap in peripheral nerve. Purified and cultured Schwann cells were still bioactive. Axonal regeneration could be enhanced after implantation of Schwann cells into nerve conduit. CONCLUSION: The ideal artificial nerve is composed of three dimensional biodegradable nerve conduit and bioactive Schwann cells, Schwann cells can be distributed in nerve conduit just like Bünger’s band.
Objective To investigate bone regeneration of the cell-biomaterial complex using strategies of tissue engineering based on cells.Methods Hydroxyapatite/collagen (HAC) sandwich composite was produced to mimic the natural extracellular matrix of bone, with type Ⅰ collagen servingas a template for apatite formation. A three-dimensional ploy-porous scaffoldwas developed by mixing HAC with poly(L-lactic acid) (PLA) using a thermally induced phase separation technique (TIPS). The rabbit periosteal cells were treated with 500 ng/ml of recombinant human bone morphogenetic protein 2(rhBMP-2), followed by seeded into pre-wet HAC-PLA scaffolds. Eighteen 3-month nude mice were implanted subcutaneously cell suspension (groupA, n=6), simple HAC-PLA scaffold (group B, n=6) and cell-biomaterial complex(group C, n=6) respectively.Results Using type Icollagen to template mineralization of calcium and phosphate in solution, we get HAC sandwich composite, mimicking the natural bone both in compositionand microstructure. The three dimensional HAC-PLA scaffold synthesized by TIPShad high porosity up to 90%, with pore size ranging from 50 μm to 300 μm. SEMexamination proved that the scaffold supported the adhesion and proliferation of the periosteal cells. Histology results showed new bone formation 8 weeks after implantation in group C. The surface of group A was smooth without neoplasma. Fibrous tissueinvasion occured in group B and no bone and cartilage formations were observed.Conclusion The constructed tissue engineering bone has emerged as another promising alternative for bone repair.
For the damage and loss of tissues and organs caused by urinary system diseases, the current clinical treatment methods have limitations. Tissue engineering provides a therapeutic method that can replace or regenerate damaged tissues and organs through the research of cells, biological scaffolds and biologically related molecules. As an emerging manufacturing technology, three-dimensional (3D) bioprinting technology can accurately control the biological materials carrying cells, which further promotes the development of tissue engineering. This article reviews the research progress and application of 3D bioprinting technology in tissue engineering of kidney, ureter, bladder, and urethra. Finally, the main current challenges and future prospects are discussed.
Objective To investigate the influence of the exogenouscollagen on the function of cells in construction of artificial biotendon.Methods Three materials including human hair, carbon fiber(CF) and polyglycolic acid (PGA) were combined with exogenous collagen and co-cultured with standard transferred human embryonic tenocytes at a concentration of 3×106/mm3 in vitro. The cell number and morphology were observed under inverted microscope and scanning electron microscope after 2 hours, 3 days and 5 days.Results In the artificial biotendon combined with collagen, the cells concentrated around the materials and the cells adhering to the materials turned into round after 2 hours. After 3 days, the adhering cells increased. After 5 days, the shape of the cells changed from round to spindle.ConclusionExogenous collagen will facilitate the cells to adhere onto materials and proliferate.