Objective To evaluate the deviation between actual and simulated screw placement after cervical pedicle screw placement assisted by 3D printed navigation template, and analyze the correlation between screw placement deviation and navigation pipe length. Methods A total of 40 patients undergoing cervical 1-7 pedicle screw insertion assisted by 3D printed navigation template in Zigong Fourth People’s Hospital between February 2018 and August 2020 were included in this prospective study. These patients were divided into 3 groups randomly, including 12 patients with a 5-mm pipe length (5 mm group), 13 patients with a 10-mm pipe length (10 mm group), and 15 patients with a 15-mm pipe length (15 mm group). Three-dimensional modeling was performed on preoperative cervical CT images of these patients and simulated pedicle screw was placed. Individualized pedicle screw navigation templates were designed according to the position and direction of simulated pedicle screws, and 3D printing was performed on the cervical model and navigation templates. Preoperative 3D printed model and navigation templates were used to simulate the surgical process to confirm the safety of screws. During the operation, pedicle screw placement was performed according to the preoperative design and simulated surgical process. The postoperative CT images were registered with the preoperative CT images in 3D model. The safety of screw placement was evaluated by the postoperative screw placement Grade, and the accuracy of screw placement was evaluated by measuring the deviation of screw placement point and the deviation of screw placement direction in horizontal plane (inclination angle) and sagittal plane (head inclination angle). The influence of different navigation pipe lengths on the safety and accuracy of screw placement was analyzed. Results A total of 164 pedicle screws were inserted with navigation template assistance, including 48 screws (38 in Grade 0 and 10 in Grade 1) in the 5 mm group, 52 screws in the 10 mm group (all in Grade 0), and 64 screws (52 in Grade 0 and 12 in Grade 1) in the 15 mm group, and the difference in the grade among the three groups was statistically significant (P<0.05). When the navigation pipe length was 5, 10, and 15 mm, respectively, the screw entry point deviation was (1.87±0.63), (1.44±0.63), and (1.66±0.54) mm, respectively, the inclination angle deviation was (2.72±0.25), (0.90±0.21), and (1.84±0.35)°, respectively, and the head inclination angle deviation was (8.63±1.83), (7.15±1.38), and (8.24±1.52)°, respectively. The deviations in the 10 mm group were all significantly less than those in the other two groups (P<0.05). Conclusions In the cervical pedicle screw placement assisted by navigation template, all the screws were Grade 0 or Grade 1, with high safety. The mean deviation of the screw entry point is within 2 mm, with high accuracy. When the length of navigation pipe is 10 mm, the safety and accuracy of screw placement can be fully guaranteed.
The iodine-125 (125I) seeds interstitial implantation has the advantages of minimal invasiveness, high local control rate, and few complications; it has attracted worldwide attention. With the application of 3D printing technology in medicine, individualized 3D templates are gradually applied to clinical practice. Individualized 3D templates combining with CT-guided 125I seeds implantation are easy to operate and can not only effectively ensure the consistency and accuracy of preoperative and postoperative dose, but also minimize complications to achieve optimal efficacy. This paper reviews the application of CT-guided implantation of 125I seeds for malignant tumors assisted by individualized 3D template, and further demonstrates the safety and effectiveness of clinical application in 125I seeds implantation to provide a reliable basis for the standardization of 125I seeds implantation.
ObjectiveTo review individual treatment effect (ITE) models developed from randomized controlled trials, with the aim of systematically summarizing the current state of model development and assessing the risk of bias. MethodsPubMed and Embase databases were searched for studies published between 1990 and 14 June 2024. Data were extracted using the CHARMS inventory, and the PROBAST risk of bias tool was used to assess model quality. ResultsA total of 11 publications were included, containing 19 ITE models. The ITE modelling methods were regression models with interaction terms (n=8, 42.1%), dual-range models (n=5, 26.3%) and machine learning (n=6, 31.6%). The ITE models had a reporting rate of 78.9%, 73.2% and 10.5% for differentiation, calibration and clinical validity, respectively. Fourteen models were assessed as having a high risk of bias (73.7%), particularly in the area of statistical analysis, due to inappropriate handling of missing data (n=15, 78.9%), inappropriate consideration of model fit issues (n=5, 26.3%), etc. ConclusionCommon approaches to ITE model development include constructing interaction terms, dual procedure theory, and machine learning, but suffer from a low number of model developments, more complex modeling methods, and non-standardized reporting. In the future, emphasis should be placed on further exploration of ITE models, promoting diversified modeling methods and standardized reporting to improve the clinical promotion and practical application value of the models.
Network meta-analysis (NMA) is a statistical technique that integrates data from multiple clinical studies and compares the efficacy and safety of multiple interventions, which can provide pro and con ranking results for all intervention options in the evidence network and provide direct evidence support for clinical decision-making. At present, NMA is usually based on the aggregation of the same type of data set, and there are still methodological and software difficulties in achieving cross-study design and cross-data format data set merging. The crossnma package of R programming language is based on Bayesian framework and Markov chain Monte Carlo algorithm, extending the three-level hierarchical model to the standard NMA data model to achieve differential merging of varied data types. The crossnma package fully considers the impact of risk bias caused by the combination of different types of data on the results by introducing model variables. In addition, the package provides functions such as result output and easy graphing, which makes it possible to combine NMA across study designs and evidence across data formats. In this study, the model based on crossnma package method and software operation will be demonstrated and explained through the examples of four individual participant datasets and two aggregate datasets.
In the process of evidence-based practice, the evaluation of evidence applicability relied on the subjective judgment of clinicians, while the systematic method of which was still in lack. The complex clinical information of traditional Chinese medicine (TCM) enhanced the uncertainty and risk of applying evidence. Based on the analysis of the process of evidence-based practice, this paper introduced the method of TCM evidence applicability evaluation and used the raw data of clinical trials to develop a clinical prediction model to enable the assessment of the evidence applicability on individual patients. The establishment of individual evidence applicability evaluation method could promote the rational application of TCM evidence in the long term.
To aim directly at the individualized character and tendency about clinical assessment of Traditional Chinese Medicine (TCM), we draw off a new pathway which is evidence-based goal attainment scale(EBGAS) in the text. i.e., we will develop clinical individualized assessment method of TCM on account of GAS by the approach of evidence based medicine.
ObjectiveTo explore the effect of individualized health education prescription on glycemic control in out-patients with diabetes. MethodBetween January and May 2014, seventy-three out-patients with diabetes were given individualized health education prescription for 6 months. The we observed the change of HbA1c level, HbA1c standard rate and medication compliance of the patients. ResultsBefore the use of individualized health education prescription, HbA1c was (8.10±1.86)%, and HbA1c was (6.55±1.26)% after the intervention (P<0.001). HbA1c standard rate (72.6%) and medication compliance (the number of patients with high, medium, and poor compliance was 36, 27, and 10, respectively) after the intervention were both significantly better than those before (16.4%; 12, 42, and 19) the intervention (P<0.001). ConclusionsEducation prescription is effective in the management of blood glucose for patients with diabetes.
ObjectiveTo explore the effectiveness of transplantation of engraved autologous costal cartilage for individualized surgical management in secondary rhinoplasty for cleft lip. MethodsBetween September 2009 and January 2014, 350 patients with secondary nasal deformity of cleft lip were treated, including 160 males and 190 females with a mean age of 18.2 years (range, 16-56 years). Nasal deformity was caused by unilateral cleft lip in 200 cases and by bilateral cleft lip in 150 cases. The interval of lip repair and nasal deformity correction was 2-50 years (mean, 12 years). About a 2-6 cm cartilage was harvested from the 6th or 7th costal cartilage, and was engraved to the shape of "ge" in Chinese. The upper part was strengthened on both sides of the alar cartilage; the lower part was fastened to columella and nasal septum cartilages. The rest of cartilages was diced into 0.1 mm×0.1 mm×0.1 mm cubes. The columella incision was designed to "Z"-plasty, and was stretched to the nasion along alar edge. The engraved autologous costal cartilage was transplanted and fixed to the collapse of nostril. The cartilage cube was transplanted and filled into the collapse of nasal root to achieve the aesthetic effect of nasal augmentation. The effectiveness was evaluated according to the grade of secondary rhinoplasty for cleft lip by ZHANG Li et al. at 1, 6, and 12 months after operation. ResultsAll incisions were primary healing. All patients were followed up 1-12 months (mean, 6 months). After rhinoplasty, the collapse of nostrils was lifted, and the shape and height of collapse of nostrils were symmetrical to normal side. The deflection of columella nasi was corrected. A beautiful shape of nose was achieved. The excellent and good rates were 98.6% at 1 month, 97.4% at 6 months, and 97.1% at 12 months after operation, showing no significant difference (χ2=0.545, P=0.761). ConclusionThe technique of transplantation of engraved autologous costal cartilage for individualized surgical management in secondary rhinoplasty for cleft lip can achieve excellent surgery effect.
The prominent feature and form of clinical diagnosis and treatment of traditional Chinese medicine is individualization, which has generated difficulty for clinical evaluation and has restricted the production of high-level evidence for traditional Chinese medicine for a long time. Based on the complexity and dynamics of individualized information under the characteristics of time and space, this paper references the theory of space-time of system science to analyze the individualized data of diagnosis and treatment of traditional Chinese medicine and summarizes the concept of the long time course for clinical evaluation. Based on the concept of the long time course, this paper starts with the origin of clinical evaluation, which is the construction of clinical problem elements named PICO, introduces dynamic evaluation factors, explores the construction of individualized dynamic evaluation method of traditional Chinese medicine, and provides demonstration and examples for the design and implementation of individualized clinical research in future.
Objective To investigate the value of computer-aided design (CAD) in defining the resection boundary, reconstructing the pelvis and hip in patients with pelvis tumors. Methods Between November 2006 and April 2009, 5 cases of pelvis tumors were treated surgically using CAD technology. There were 3 males and 2 females with an average age of 36.4 years (range, 24-62 years). The cause was osteosarcoma, giant cell tumor of bone, and angiosarcoma in 1 case, respectively,and chondrosarcoma in 2 cases. According to the Enneking system for staging benign and mal ignant musculoskeletal tumors, regions I, I + II, III, IV, and I + IV is in 1 case, respectively. According to the principle of reverse engineering, 5 patients with pelvis tumors were checked with lamellar CT/MRI scanning, whose two-dimensional data were obtained in disease area. The three-dimensional reconstruction of pelvic anatomical model, precise resection boundary of tumor, individual surgical template, individual prosthesis, and surgical simulation were precisely made by computer with CAD software. Based on the proposal of CAD, the bone tumor was resected accurately, and allograft il ium with internal fixation instrument or allogeneic il ium with personal ized prosthetic replacement were used to reconstruct the bone defect after tumor was resected. Results The operation was successfully performed in 5 cases. The average operation time was 7.9 hours, and the average blood loss was 3 125 mL. Hemorrhage and cerebrospinal fluid leakage occurred in 1 case, respectively, and were cured after debridement. Five patients were followed up from 24 to 50 months (mean, 34.5 months). All patients began non-weight bearing walk with double crutches at 4-6 weeks after operation, and began walk at 3-6 months after operation. Local recurrence developed in 2 patients at 18 months after operation, and resection and radiotherapy were performed. According to International Society of Limb Salvage criteria for curative effectiveness of bone tumor l imb salvage, the results were excellent in 2 and good in 3. Conclusion The individual surgical template, individual prosthesis, and surgical simulation by CAD ensure the precision and rel iabil ity of pelvis tumors resection. The CAD technology promotes pelvis tumor resection and the reconstruction of pelvis to individual treatment stage, and good curative effectiveness can be obtained.