Objective To investigate the performance of loading naringin composite scaffolds and its effects on repair of osteochondral defects. Methods The loading naringin and unloading naringin sustained release microspheres were prepared by W/O/W method; with the materials of the attpulgite and the collagen type I, the loading naringin, unloading naringin, and loading transforming growth factor β1 (TGF-β1) osteochondral composite scaffolds were constructed respectively by " 3 layers sandwich method”. The effect of sustained-release of loading naringin microspheres, the morphology of the composite scaffolds, and the biocompatibility were evaluated respectively by releasingin vitro, scanning electron microscope, and cell counting kit 8. Forty Japanese white rabbits were randomly divided into groups A, B, C, and D, 10 rabbits each group. After a osteochondral defect of 4.5 mm in diameter and 4 mm in depth was made in the intercondylar fossa of two femurs. Defect was not repaired in group A (blank control), and defect was repaired with unloading naringin composite scaffolds (negative control group), loading naringin composite scaffolds (experimental group), and loading TGF-β1 composite scaffolds (positive control group) in groups B, C, and D respectively. At 3 and 6 months after repair, the intercondylar fossa was harvested for the general, HE staining, and toluidine blue staining to observe the repair effect. Western blot was used to detect the expression of collagen type II in the new cartilage. Results Loading naringin microspheres had good effect of sustained-release; the osteochondral composite scaffolds had good porosity; the cell proliferation rate on loading naringin composite scaffold was increased significantly when compared with unloading naringin scaffold (P<0.05). General observation revealed that defect range of groups C and D was reduced significantly when compared with groups A and B at 3 months after repair; at 6 months after repair, defects of group C were covered by new cartilage, and new cartilage well integrated with the adjacent cartilage in group D. The results of histological staining revealed that defects were filled with a small amount of fibrous tissue in groups A and B, and a small amount of new cartilage in groups C and D at 3 months after repair; new cartilage of groups C and D was similar to normal cartilage, but defects were filled with a large amount of fibrous tissue in groups A and B at 6 months after repair. The expression of collagen type II in groups C and D was significantly higher than that in groups A and B (P<0.05), but no significant difference was found between groups C and D (P>0.05). Conclusion Loading naringin composite scaffolds have good biocompatibility and effect in repair of rabbit articular osteochondral defects.
Objective To investigate the growth of tumors and the natural life length of the rats after the adriamycinethylcellulose microspheres(ADM-EC mc) were injected in the rats bearing transplantable liver cancer through their hepatic arteries.Methods ADM-EC mc were infused into the proper hepatic arteries of the Wistar rats (W256). All of the rats were divided randomly into five groups, group 1: control, group 2: normal saline, group 3: conventional ADM, group 4: placebo ethylcellulose microspheres, and group 5: ADM-EC mc. Results As compared with other four groups, the ADM-EC mc (group 5) showed the best inhibition of the growth of tumors and the longest mean life length of the rats. Conclusion Hepatic arterial infusion of ADM-EC mc can inhibit the growth of the tumor, aggravate the necrosis, and improve the effects of the chemotherapy of liver cancer.
Objective To compare the characteristics of gelatin microspheres crossl inked by glutaraldehyde (GA) or geni pin (GP). Methods Gelatin microspheres, prepared by the improved emulsified cold-condensation method, were crossl inked by GP and GA, respectively. After being dispersed in PBS, two kinds of microspheres with 60% degree of cross l inking were compared in terms of morphology, swell ing and degrading properties. rhBMP-2 were loaded into the GP and GAmicrospheres, and the encapsulation rate, drug loading and releasing capacity were measured; 100%, 50% and 25% leaching l iquid of GP and GA microspheres were respectively cultured with rat osteoblast (DMEM group as the control), and cell prol iferation was measured by MTT method to grade the cell cytotoxicity. Results GP and GA microspheres were both spherical with the diameters of (78 ± 18) μm and (65 ± 10) μm, and there were no difference between both microspheres in drug loading and encapsulation rate. But, GP microspheres, with long degrading period (28 days) compared to GA microspheres (21 days), had better dispersibil ity, and swell ing rate (89.0% ± 4.8%), the percentage of cumulative drug releasing at 10 days (78.80% ± 4.96%) were both lower than GA microsphere (118.0% ± 7.6%, 90.50% ± 5.12%). The percentages of drug loading of GP and GA were (921 ± 73) and (965 ± 62) ng/g, and the encapsulation rates were 88.5% ± 2.1% and 89.7% ± 1.8%; showing no significant difference (P gt; 0.05). The cell cytotoxicity of 100%, 50% and 25% leaching l iquid of GP microspheres was all at the level I, but leaching l iquid of GA microspheres with corresponding concentration were at the levels of III, III and II. Conclusion GP crossl inked gelatin microspheres are superior to GA crossl inked gelatin microspheres and can be widely used in tissue engineering field.
Objective To investigate the preparation and properties of the novel silica (SiO2)/hydroxyapatite (HAP) whiskers porous ceramics scaffold. Methods The HAP whiskers were modified by the SiO2 microspheres using the Stöber method. Three types of SiO2/HAP whiskers were fabricated under different factors (for the No.1 samples, the content of tetraethoxysilane, stirring time, calcination temperature, and soaking time were 10 mL, 12 hours, 560℃, and 0.5 hours, respectively; and in the No.2 samples, those were 15 mL, 24 hours, 650℃, and 2 hours, respectively; while those in the No.3 samples were 20 mL, 48 hours, 750℃, and 4 hours, respectively). The phase and morphology of the self-made HAP whisker and 3 types of SiO2/HAP whiskers were detected by the X-ray diffraction analysis and scanning electron microscopy. Taken the self-made HAP whisker and 3 types of SiO2/HAP whiskers as raw materials, various porous ceramic materials were prepared using the mechanical foaming method combined with extrusion molding method, and the low-temperature heat treatment. The pore structure of porous ceramics was observed by scanning electron microscopy. Its porosity and pore size distribution were measured. And further the axial compressive strength was measured, and the biodegradability was detected by simulated body fluid. Cell counting kit 8 method was used to conduct cytotoxicity experiments on the extract of porous ceramics. Results The SiO2 microspheres modified HAP whiskers and its porous ceramic materials were prepared successfully, respectively. In the SiO2/HAP whiskers, the amorphous SiO2 microspheres with a diameter of 200 nm, uniform distribution and good adhesion were attached to the surface of the whiskers, and the number of microspheres was controllable. The apparent porosity of the porous ceramic scaffold was about 78%, and its pore structure was composed of neatly arranged longitudinal through-holes and a large number of micro/nano through-holes. Compared with HAP whisker porous ceramic, the axial compressive strength of the SiO2/HAP whisker porous ceramics could reach 1.0 MPa, which increased the strength by nearly 4 times. Among them, the axial compressive strength of the No.2 SiO2/HAP whisker porous ceramic was the highest. The SiO2 microspheres attached to the surface of the whiskers could provide sites for the deposition of apatite. With the content of SiO2 microspheres increased, the deposition rate of apatite accelerated. The cytotoxicity level of the prepared porous ceramics ranged from 0 to 1, without cytotoxicity. Conclusion SiO2/HAP whisker porous ceramics have good biological activity, high porosity, three-dimensional complex pore structure, good axial compressive strength, and no cytotoxicity, which make it a promising scaffold material for bone tissue engineering.
Objective To evaluate the effect of the local del ivery of basic fibroblast growth factor 2 (bFGF-2) on the osseointegration around titanium implant of diabetic rats. Methods The bFGF-2-loaded poly (lactic-co-glycol ic acid) microspheres were prepared by water/oil/water (W/O/W) double-emulsion solvent evaporation method. Thirty-five male SPF level Sprague Dawley rats, weighing 220-250 g and aged 9 weeks, were selected as experimental animals. Ten rats were fedwith the routine diet as normal control group. The other 25 rats were made the diabetic animal model by giving high fat-sugar diet and a low dose streptozotocin (30 mg/ kg) intravenously; 20 rats were made the diabetic animal model successfully. Then 20 rats were randomly divided into diabetic control group (n=10) and bFGF-2 intervention group (n=10). A hole was drilled in the right tibia bone of all rats, and the titanium implant treated by micro-arc oxidation surface was planted into the hole. Simultaneously, the previously prepared microspheres and blood were mixed and were loaded on the surface of the implant before it was implanted into the rats of the bFGF-2 intervention group. At 4 and 8 weeks, the tibia containing implants was harvested, embedded with resin and made undecalcified tissue sl ices to compare the osseointegration. Results At 4 weeks, the implants of the normal control group were surrounded by new lamellar bone with continuity; whereas the tissue around the implants of the diabetic control group contained l ittle woven bone and some fibrous tissue; and obvious new formed bone with continuity was observed in bFGF-2 intervention group. At 8 weeks, the results of 3 groups were similar to those at 4 weeks. At 4 weeks, the percentage of bone-implant contact (BIC) in diabetic control group was significantly less than those in normal control group (P lt; 0.05) and in bFGF-2 intervention group (P lt; 0.05); the BIC in bFGF-2 intervention group was less than in normal control group, but showing no significant difference (P gt; 0.05). After 8 weeks, the BIC in normal control group and in bFGF-2 intervention group were significantly greater than that in diabetic control group (P lt; 0.05), but there was no significant difference between bFGF-2 intervention group and normal control group (P gt; 0.05). Conclusion Local del ivery of bFGF-2 around titanium implants may improve the osseointegration in diabetic rats.
Curcumin-loaded poly (α-isobutyl cyanoacrylate) microspheres (Cur-HP-β-CD-PiBCA) were prepared by one-step emulsification with α-isobutyl cyanoacrylate as materials, poloxamer 188 as emulsifier, and curcumin complex with hydroxypropyl-β-cyclodextrin (Cur-HP-β-CD) as drug prepared by kneading method. Effects of emulsifier and drug concentration on microspheres size and distribution, drug loading and encapsulation efficiency were investigated in detail. And the curcumin release of drug-loaded microspheres was also studied. Results showed that as the emulsifier concentration increased from 0.01% to 0.07%, particle size of the drug-loaded microspheres decreased while particle size distribution, drug loading and entrapment efficiency increased. The optimized concentration of surfactant was 0.05%. With increasing the concentration of drug from 0.03% to 0.07%, drug loading of Cur-HP-β-CD-PiBCA increased, but encapsulation efficiency decreased. Additionally, the results of drug release experiments revealed that the higher drug loading of Cur-HP-β-CD-PiBCA was, the lower cumulative release percentage was. Drug-loading of cumulative inclusions in HP-β-CD by PiBCA can improve its wettability, and increase the degree of dissolution and bioavailability.
Objective To estimate the relationship between arterial blood ketone body ratio (AKBR) and liver function and to appraise the feasibility of adding AKBR into liver function estimate. MethodsFrom 1994 to 1998, 44 patients with unresectable liver cancer recieved the combined radiochemoembolization with mixed emulsion of phosphorus32 glass microspheres (32PGMS), chemoagent and glycerine or lipiodol, via intraoperative hepatic artery instillation, hepatic artery ligation and operational arterial embolization (HAL+OAE) or transcatheter hepatic artery embolization (TAE). Preoperative and postoperative function and energy change level of the liver were tested by liver function test and AKBR. CT, SPECT, AFP were used to judge the therapy effect; multivariate statistical analysis methods were used to evaluate the correlation between AKBR and liver function. Spearmen rank correlation analysis was used to evaluate whether there was any relationship between AKBR and liver function test, and to evaluate that there was any relationship between AKBR and survival time. ResultsA negative correlation showed between the level of AKBR and liver function. The correlation coefficient of the three level of AKBR before operation and survival time was 0.4409. Conclusion AKBR can well reflect the degree of liver function.
Objective To evaluate the suitability of the biodegradable microsphere encapsulation of adenovirus as a targeting vector for gene therapy of hepatocellular carcinoma. Methods Encapsulate the recombinant adenovirus in PLG 〔poly (lactic/glycolic)〕 copolymer by the solution evaporation method, the release test and the bioactivity of viruses incorporated in vitro were studied. Results More than 19.3% of adenovirus was encapsulated in PLG microspheres. The release test shows that the adenovirus was released for more than 200 h, 50% were shed within the first 100 h, and their activity was retained. Conclusion Recombinant adenovirus can be formulated in a polymer preparation of PLG with retention of bioactivity. It may be a valuable vector for the gene therapy of liver cancer.
The purpose of this study is to investigate the effect of superparamagnetic chitosan FGF-2 gelatin microspheres (SPCFGM) on the proliferation and differentiation of mouse mesenchymal stem cells. The superparamagnetic iron oxide chitosan nanoparticles (SPIOCNs) were synthesized by means of chemical co-precipitation, combined with FGF-2. Then The SPCFGM and superparamagnetic chitosan gelatin microspheres (SPCGM) were prepared by means of crosslinking-emulsion. The properties of SPCFGM and SPIONs were measured by laser diffraction particle size analyser and transmisson electron microscopy. The SPCFGM were measured for drug loading capacity, encapsulation efficiency and release pharmaceutical properties in vitro. The C3H10 cells were grouped according to the different ingredients being added to the culture medium: SPCFGM group, SPCGM group and DMEM as control group. Cell apoptosis was analyzed by DAPI staining. The protein expression level of FGF-2 was determined by Western blot. The proliferation activity and cell cycle phase of C3H10 were examined by CCK8 and flow cytometry. The results demonstrated that both of the SPIOCNs and SPCFGM were exhibited structure of spherical crystallization with a diameter of (25±9) nm and (140±12) μm, respectively. There were no apoptosis cells in the three group cells. Both the protein expression level of FGF-2 and cell proliferation activity increased significantly in the SPCFGM group cells(P<0.05). The SPCFGM is successfully constructed and it can controlled-release FGF-2, remained the biological activity of FGF-2, which can promote proliferation activity of C3H10 cells, and are non-toxic to the cell.
Objective To prepare a novel hyaluronic acid methacrylate (HAMA) hydrogel microspheres loaded polyhedral oligomeric silsesquioxane-diclofenac sodium (POSS-DS) patricles, then investigate its physicochemical characteristics and in vitro and in vivo biological properties. Methods Using sulfhydryl POSS (POSS-SH) as a nano-construction platform, polyethylene glycol and DS were chemically linked through the “click chemistry” method to construct functional nanoparticle POSS-DS. The composition was analyzed by nuclear magnetic resonance spectroscopy and the morphology was characterized by transmission electron microscopy. In order to achieve drug sustained release, POSS-DS was encapsulated in HAMA, and hybrid hydrogel microspheres were prepared by microfluidic technology, namely HAMA@POSS-DS. The morphology of the hybrid hydrogel microspheres was characterized by optical microscope and scanning electron microscope. The in vitro degradation and drug release efficiency were observed. Cell counting kit 8 (CCK-8) and live/dead staining were used to detect the effect on chondrocyte proliferation. Moreover, a chondrocyte inflammation model was constructed and cultured with HAMA@POSS-DS. The relevant inflammatory indicators, including collagen type Ⅱ, aggrecan (AGG), matrix metalloproteinase 13 (MMP-13), recombinant A disintegrin and metalloproteinase with thrombospondin 5 (Adamts5), and recombinant tachykinin precursor 1 (TAC1) were detected by immunofluorescence staining and real-time fluorescence quantitative PCR, with normal cultured chondrocytes and the chondrocyte inflammation model without treatment as control group and blank group respectively to further evaluate their anti-inflammatory activity. Finally, by constructing a rat model of knee osteoarthritis, the effectiveness of HAMA@POSS-DS on osteoarthritis was evaluated by X-ray film and Micro-CT examination. Results The overall particle size of POSS-DS nanoparticles was uniform with a diameter of about 100 nm. HAMA@POSS-DS hydrogel microspheres were opaque spheres with a diameter of about 100 μm and a spherical porous structure. The degradation period was 9 weeks, during which the loaded POSS-DS nanoparticles were slowly released. CCK-8 and live/dead staining showed no obvious cytotoxicity at HAMA@POSS-DS, and POSS-DS released by HAMA@POSS-DS significantly promoted cell proliferation (P<0.05). In the chondrocyte anti-inflammatory experiment, the relative expression of collagen type Ⅱ mRNA in HAMA@POSS-DS group was significantly higher than that in control group and blank group (P<0.05). The relative expression level of AGG mRNA was significantly higher than that of blank group (P<0.05). The relative expressions of MMP-13, Adamts5, and TAC1 mRNA in HAMA@POSS-DS group were significantly lower than those in blank group (P<0.05). In vivo experiments showed that the joint space width decreased after operation in rats with osteoarthritis, but HAMA@POSS-DS delayed the process of joint space narrowing and significantly improved the periarticular osteophytosis (P<0.05). Conclusion HAMA@POSS-DS can effectively regulate the local inflammatory microenvironment and significantly promote chondrocyte proliferation, which is conducive to promoting cartilage regeneration and repair in osteoarthritis.