To serve as carriers of cells and bioactive molecules, three-dimensional scaffolds play a key role in bone defect repair. The chemical component and microstructure of the scaffold can affect the mechanical properties and seed cells. A variety of fabrication techniques have been used in producing scaffolds, some made random porous structure, some created well-designed structure using rapid prototyping methods, and others prepared bio-derived materials as scaffolds. However, scaffolds may vary in their inner structure, mechanical properties and repairing efficiency as well because of different manufacturing methods. In this review, we overview the main achievements concerning the effects of material and microstructure on the mechanical performance, seed cells and defect repair of bone scaffolds.
OBJECTIVE: To sum up the clinical results of bio-derived bone transplantation in orthopedics with tissue engineering technique. METHODS: From January 2000 to May 2002, 52 cases with various types of bone defect were treated with tissue engineered bone, which was constructed in vitro by allogeneous osteoblasts from periosteum (1 x 10(6)/ml) with bio-derived bone scaffold following 3 to 7 days co-culture. Among them, there were 7 cases of bone cyst, 22 cases of non-union or malunion of old fracture, 15 cases of fresh comminuted fracture of bone defect, 4 cases of spinal fracture and posterior route spinal fusion, 3 cases of bone implant of alveolar bone, 1 case of fusion of tarsotarsal joint. The total weight of tissue engineered bone was 349 g in all the cases, averaged 6.7 g in each case. RESULTS: All the cases were followed up after operation, averaged in 18.5 months. The wound in all the case healed by first intention, but 1 case with second intention. Bone union was completed within 3 to 4.5 months in 50 cases, but 2 cases of delayed union. Six cases were performed analysis of CD3, CD4, CD8, ICAM-1 and VCAM-1 before and after operation, and no obvious abnormities were observed. CONCLUSION: Bio-derived tissue engineered bone has good osteogenesis. No obvious rejection and other complications are observed in the clinical application.
Objective To review the recent advances in the application of graphene oxide (GO) for bone tissue engineering. Methods The latest literature at home and abroad on the GO used in the bone regeneration and repair was reviewed, including general properties of GO, degradation performance, biocompatibility, and application in bone tissue engineering. Results GO has an abundance of oxygen-containing functionalities, high surface area, and good biocompatibility. In addition, it can promote stem cell adhesion, proliferation, and differentiation. Moreover, GO has many advantages in the construction of new composite scaffolds and improvement of the performance of traditional scaffolds. Conclusion GO has been a hot topic in the field of bone tissue engineering due to its excellent physical and chemical properties. And many problems still need to be solved.
Objective To investigate the biocompatibility of p(3HB-co-3HH) and marrow mesenchymal stell cells (MSCs).Methods MSCs were inoculated to p(3HB-co-3HH), and then cultured for 2-4 weeks in vitro and embedded for 2 weeks in vivo. The growth, proliferation, morphology and phenotype properties of MSCs were observed by use of phase contrast microscope, electron microscope, HE staining and staining of type Ⅰ collagen. Results p(3HB-co-3HH) hadgood compatibility. The inoculated MSCs could be well-distributed, attached well and obtain the phenotype of MSCs in p(3HB-co-3HH). After osteogenic inducer were added, MSCs differentiated to osteoblasts and secreted matrix. Type Ⅰ collagen was stained positively by immunohistochemical techenique. Conclusion The above results demonstrate that there is satisfactory biocompatibility betweenp(3HB-co-3HH) and MSCs.
ObjectiveTo manufacture a polycaprolactone (PCL)/type Ⅰ collagen (COL Ⅰ) tissue engineered meniscus scaffold (hereinafter referred to as PCL/COL Ⅰ meniscus scaffold) by three-dimensional (3D) printing with low temperature deposition technique and to study its physicochemical properties.MethodsFirst, the 15% PCL/4% COLⅠ composite solution and 15% PCL simple solution were prepared. Then, 15% PCL/4% COL Ⅰmeniscus scaffold and 15% PCL meniscal scaffold were prepared by using 3D printing with low temperature deposition techniques. The morphology and microstructure of the scaffolds were observed by gross observation and scanning electron microscope. The compression modulus and tensile modulus of the scaffolds were measured by biomechanical test. The components of the scaffolds were analyzed by Fourier transform infrared spectroscopy (FTIR). The contact angle of the scaffold surface was measured. The meniscus cells of rabbits were cultured with the two scaffold extracts and scaffolds, respectively. After cultured, the cell proliferations were detected by cell counting kit 8 (CCK-8), and the normal cultured cells were used as controls. Cell adhesion and growth of scaffold-cell complex were observed by scanning electron microscope.ResultsAccording to the gross and scanning electron microscope observations, two scaffolds had orientated 3D microstructures and pores, but the surface of the PCL/COLⅠ meniscus scaffold was rougher than the PCL meniscus scaffold. Biomechanical analysis showed that the tensile modulus and compression modulus of the PCL/COL Ⅰ meniscus scaffold were not significantly different from those of the PCL meniscus scaffold (P>0.05). FTIR analysis results showed that COL Ⅰ and PCL were successful mixed in PCL/ COL Ⅰ meniscus scaffolds. The contact angle of PCL/COLⅠ meniscus scaffold [(83.19±7.49)°] was significantly lower than that of PCL meniscus scaffold [(111.13±5.70)°] (t=6.638, P=0.000). The results of the CCK-8 assay indicated that with time, the number of cells cultured in two scaffold extracts showed an increasing trend, and there was no significant difference when compared with the control group (P>0.05). Scanning electron microscope observation showed that the cells attached on the PCL/ COL Ⅰ meniscus scaffold more than that on the PCL scaffold.ConclusionPCL/COLⅠmeniscus scaffolds are prepared by 3D printing with low temperature deposition technique, which has excellent physicochemical properties without cytotoxicity. PCL/COLⅠmeniscus scaffold is expected to be used as the material for meniscus tissue engineering.
Objective To review the current status and problems in the developing scaffolds for the myocardial tissue engineering appl ication. Methods The l iterature concerning the myocardial tissue engineering scaffold in recent years was reviewed extensively and summarized. Results As one of three elements for tissue engineering, a proper scafold is veryimportant for the prol iferation and differentiation of the seeding cells. The naturally derived and synthetic extracellular matrix (ECM) materials aim to closely resemble the in vivo microenvironment by acting as an active component of the developing tissue construct in myocardial tissue engineering. With the advent and continuous refinement of cell removal techniques, a new class of native ECM has emerged with some striking advantages. Conclusion Through using the principle of composite scaffold, computers and other high-technology nano-polymer technology, surface modification of traditional biological materials in myocardial tissue engineering are expected to provide ideal myocardial scaffolds.
ObjectiveTo review the methods of improving the mechanical properties of hydrogels and the research progress in bone tissue engineering. MethodsThe recent domestic and foreign literature on hydrogels in bone tissue engineering was reviewed, and the methods of improving the mechanical properties of hydrogels and the effect of bone repair in vivo and in vitro were summarized. ResultsHydrogels are widely used in bone tissue engineering, but their mechanical properties are poor. Improving the mechanical properties of hydrogels can enhance bone repair. The methods of improving the mechanical properties of hydrogels include the construction of dual network structures, inorganic nanoparticle composites, introduction of conductive materials, and fiber network reinforcement. These methods can improve the mechanical properties of hydrogels to various degrees while also demonstrating a significant bone repair impact. ConclusionThe mechanical properties of hydrogels can be effectively improved by modifying the system, components, and fiber structure, and bone repair can be effectively promoted.
ObjectiveTo investigate the effect of repairing radial bone defect with scaffold material of attapulgite/collagen type I/poly (caprolactone) (ATP/Col I/PCL) in rabbits and the possibility as bone graft substitutes. MethodsATP/Col I/PCL materials were prepared via adding ATP to hexafluoroisopropanol after dissolved Col I/PCL (3∶2), and Col I/PCL materials via dissolving Col I/PCL (3∶2) in hexafluoroisopropanol served as control. The structure of scaffolds was observed under scanning electron microscope (SEM). Twenty-four Japanese white rabbits (male, 2 months old) were used to establish the bilateral radius defect model of 15 mm in length, and randomly divided into group A (6 rabbits, 12 defects), group B (9 rabbits, 18 defects), and group C (9 rabbits, 18 defects); then the Col I/PCL scaffold was implanted in the bone defect area in group B, the ATP/Col I/PCL scaffold in group C, no treatment was done in group A as control. The general condition of rabbits was observed after operation, and bone defect repair was evaluated by X-ray at 4, 8, and 12 weeks. At 12 weeks, the tissue of defect area was harvested for the general, SEM, Micro-CT, histological, and immunohistochemical staining to observe defect repair and material degradation. ResultsSEM observation showed that two kinds of materials were porous structure, ATP/Col I/PCL structure was more dense than Col I/PCL. All animals survived to the end of experiment, and no incision infection occurred during repair process.X-ray films showed that the bone marrow cavity was re-opened in defect area of group C with time, the repair effect was superior to that of groups A and B. At 12 weeks after operation, general observation showed that scaffold material had good fusion with the surrounding tissue in groups B and C, defect was filled with connective tissue in group A. SEM indicated that the surface and pore of the scaffold were covered with a large number of cells and tissues in groups B and C. Micro-CT demonstrated that the new bone volume, bone mineral content, tissue mineral content, and connectivity density of group C were significantly higher than those of groups A and B (P<0.05). The observation of histology and immunohistochemical staining indicated that there were lots of connective tissues in defect area of group A, and ALP, Col I, and OPN were weakly expressed; there were many collagen fibers in scaffold degradation area in group B, and the expression levels of ALP, Col I, and OPN were higher than those of group A; there was few new bone in group C, the degradation rate of the scaffold was slower than that of group B, and the expression of Col I and OPN were enhanced, while ALP was weakened when compared with groups A and B. ConclusionATP/Col I/PCL composite scaffold material can degrade in vivo, and has dense three-dimensional porous structure, good biocompatibility, and high potentiality of bone repair, so it can be used as bone substitute material.
ObjectiveTo review the literature on the research status of vascularization of tissue engineered peripheral nerve so as to provide the theoretical basis for the vascularization of tissue engineered peripheral nerve.MethodsThe literature related to the vascularization of peripheral nerve tissue engineering in recent years was reviewed and summarized according to the five aspects of promoting vascularization: local microenvironment and blood supply characteristics of peripheral nerve regeneration, scaffold material modification, seed cells, autologous vascular bundle implantation, and pro-vascular factors.ResultsTissue engineered peripheral nerve has brought a new hope for the repair of peripheral nerve injury, but the repair effect of large nerve defects is not good, which is mainly related to the degree of vascularization of the nerve grafts. So it is particularly important to promote the early vascularization of tissue engineered peripheral nerve. Previous studies have mainly focused on the four aspects of scaffold material modification, seed cells, autologous vascular bundle implantation, and angiogenesis related factors. Recent studies show that the combination of the above two or more factors in the tissue engineered peripheral nerves can better promote the vascularization of tissue engineered peripheral nerves.ConclusionPromoting early vascularization of tissue engineered peripheral nerves can provide timely nutritional support for seed cells on the scaffold, promote axon growth and nerve regeneration, and facilitate the repair of large peripheral nerve defects in clinical practice.
Objective To review the research progress of graphene and its derivatives in repair of peripheral nerve defect. Methods The related literature of graphene and its derivatives in repair of peripheral nerve defect in recent years was extensively reviewed. Results It is confirmed by in vitro and in vivo experiments that graphene and its derivatives can promote cell adhesion, proliferation, differentiation and neurite growth effectively. They have good electrical conductivity, excellent mechanical properties, larger specific surface area, and other advantages when compared with traditional materials. The three-dimensional scaffold can improve the effect of nerve repair. Conclusion The metabolic pathways and long-term reaction of graphene and its derivatives in the body are unclear. How to regulate their biodegradation and explain the electric coupling reaction mechanism between cells and materials also need to be further explored.